Timbeter Blog

Stay informed, improve your practices, and navigate the timber industry with confidence.

Timbeter at COP31: Timber Traceability Starts at the Pile

November 16, 2026
Timbeter at COP31: Timber Traceability Starts at the Pile

Climate goals meet the forest road

On 16 November at 10:30, the Estonian Pavilion at COP31 in Antalya hosts a session built on a simple premise: climate solutions only matter once they leave the lab and reach daily operations. Timbeter CEO and founder Anna-Greta Tsahkna joins the panel “From Tree Huggers to Unicorns: How Science and Startups Can Build Climate Solutions,” alongside Meelis Seedre of Kappazeta and Mikk Marran of RMK, Estonia’s State Forest Management Centre. Helen Sulg of the Environmental Investment Centre (KIK) moderates. Visitors can find the Estonian delegation in the Blue Zone, Pavilion C410.

The timing is pointed. Forty-four days after the session, on 30 December 2026, the EU Deforestation Regulation (EUDR) starts applying to large and medium operators, and to micro and small companies already in the timber sector. Every operator placing wood on the EU market will need to show where it came from and how much of it there is. For many supply chains, that second question is harder than it sounds.

Picture a roadside landing after a week of harvesting. A forester walks the pile with a tape and a notebook, estimates the stacked volume, applies a conversion factor and writes down a number. That number then travels to the truck, the mill gate, the invoice and, soon, the due diligence statement.

The weakest data point is the first one

Satellite monitoring has made it far easier to verify where forest loss has and has not happened. Kappazeta’s AI-driven monitoring, represented on the same panel, is a good example. But a satellite can confirm that a plot is intact; it cannot tell a buyer how many cubic meters left that plot on a given truck. In most of the world, from Baltic state forests to plantations in Southeast Asia and East Africa, the link between origin and volume is still made by hand.

Manual scaling has two structural weaknesses. It leaves no evidence behind: once a scaling dispute starts, there is no photo, timestamp or location to check against. And it does not scale well, because the more volume an operation handles, the less time each measurement gets.

Every measured pile becomes evidence

Photo-optical measurement changes the unit of record. Instead of a figure in a notebook, each pile or truckload produces a photo, a calculated volume, a log count and diameter data, tied to a location, a time and the person who measured it. Tools such as the Timbeter app do this from a smartphone in the field, and results sync to a cloud platform like Timbeter Dashboard, where managers, buyers and auditors see the same record.

Polish State Forests (Lasy Państwowe) shows what this looks like at national scale. A 2024 pilot in 14 forest districts measured more than 250,000 m³ of timber photo-optically. The second phase now extends to more than 700 forest units, with data flowing directly into the State Forests’ Leśnik+ system. Reported results include less paperwork for foresters, faster volume calculation, and photo and geolocation records that make measurements transparent for contractors and timber buyers.

In Brazil, Suzano uses the same approach to measure roundwood truck loads moving from farms to a railroad terminal. Forestry inventory analyst Sebastião Oswaldo Ferreira put the outcome plainly: “We reached 100% traceability of measurements.” Every load carries an image and an identified operator, which turns each measurement into an audit trail rather than an assertion.

Forest data must connect from orbit to the mill gate

The Estonian panel brings together three layers of the same chain: satellite monitoring, a state forest manager, and field-level measurement. That combination is the point. Regulators, certification schemes such as FSC and PEFC, and carbon-accounting frameworks increasingly expect forest data that can be traced end to end, not reconciled after the fact.

This matters well beyond Europe. Exporters in Latin America, Africa and Southeast Asia selling into the EU face the same due diligence requirements as Baltic sawmills, often across longer supply chains. Digital measurement is not the whole answer to deforestation-free sourcing, and several tools on the market address it. But without reliable volume data at the first point of measurement, the rest of the documentation rests on an estimate.

Traceability starts before the truck leaves

Climate commitments made in Antalya will ultimately be tested by data collected on forest roads, at landings and at mill gates. If your operation still relies on manual scaling for the volumes you document, the weeks before 30 December are the right time to test a digital workflow on a real pile. Book a short demo with the Timbeter team to see how photo-based measurement fits into your current process.

Make every pile you measure count as evidence before 30 December.

Timbeter turns a smartphone photo into volume, log count and diameter data, with location and time attached, so your documentation rests on records instead of estimates.

Book a demo

See it in action

First 10 measurements are free. No credit card required.